Levelsystem

The AMPLO Hydraulic Level system is designed for Motorhomes and Caravans, but is also a perfect choice for other vehicles such as Outside Broadcast Units, Police, Fire and Ambulance Mobile Command Rooms, Mobile Libraries, Mobile Offices, Mobile Shops, Mobile Clinics or Exhibition Units.

Motorhome Stability

You know the story: you are at a camp site or you are making a short stop at a beautiful spot along the road, but your Motorhome is rather uneven. So uneven that the available levellers are not enough to put your vehicle in a more or less even position. So you try a few more planks, another jack, etc. After you have done this, you can at long last enjoy your rest, but then you want to move on again and at the next stop it will probably be the same story all over again. A time-consuming activity that gives a lot of trouble.

To save you all this trouble, AMPLO have developed the Levelsystem. By only pushing one button, your camper van is set in a level position fully automatically, and your camper van is completely ready in only 2 minutes. All wheels stay on the ground at all times. And what about the fact that the camper van is now also perfectly stable. No movement whatsoever can be felt in the camper van when someone walks through it or steps in. This is also very comfortable in the morning when an early riser walks about inside or gets out of the camper van which would otherwise be rocked by these movements.

Caravan Levelling

The AMPLO Level system keeps you mobile on-site. Forget messing around with jacks and wedges. Arrive, setup – holiday.

In a horizontal position at the push of a button: the AMPLO Levelsystem automatically straightens up your Caravan in just two minutes. The unique feature of the AMPLO Level system: six supports are connected with the vehicle frame using a mounting plate. This achieves unparalleled stability and provides additional theft protection.

Operation takes place using a control unit inside the caravan. The hydraulic supports are either automatically extended and adjusted as required, or the supports are controlled in pairs on one side by hand. This prevents torsion in the chassis.

Contact us for more information about Levelling and Stabilising systems.